RX8 2RTR-1.3L (2006)
Caution:
^
Improper adjustment of the TR switch will cause abnormal operation of the automatic transmission. Be sure to use the SST to adjust
the TR switch correctly.
16. Using the SST and by turning the TR switch, adjust the positions of the manual shaft and the TR switch neutral hole.
17. Tighten the TR switch mounting bolts.
Tightening torque 4.4-6.5 N-m (45-66 kgf-cm, 40-57 in-lbf)
18. Inspect for continuity between TR switch terminals C and D.
19. Remove the SST.
20. Install the manual shaft lever component and washer.
Caution: Do not use an impact wrench. Hold the manual shaft lever when tightening the manual shaft nut, otherwise the transmission
may be damaged.
