RX8 2RTR-1.3L (2006)
6. Disconnect the TR switch connector.
7. Verify continuity as indicated in the table.
^
If there is any malfunction, adjust the TR switch.
8. Reinspect for continuity at TR switch.
^
If there is any malfunction, replace the TR switch.
9. Connect the TR switch connector.
10. Install the insulator.
Tightening torque 8-11 N-m (82-112 kgf-cm, 72-97 in-lbf)
11. Install the catalytic converter.
12. Connect the negative battery cable.
13. Install the battery cover.
14. Install the engine cover.
