Tribute 2WD L4-2.3L (2005)
Rear Door Exterior Handle: Service and Repair
Removal and Installation
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Disconnect the door latch electrical connector.
1. Release the clip.
2. Disconnect the electrical connector.
4. Position the rear door glass top run aside.
1. Remove the bolts.
2. Position the rear door glass top run aside.
5. Disconnect the exterior door handle actuating rod.
1. Open the clip.
2. Disconnect the actuating rod.
6. Remove the exterior door handle screws.