Tribute 2WD L4-2.3L (2005)
Liftgate Window Glass: Service and Repair
Removal and Installation
1. If installing a new liftgate window glass, remove the rear wiper motor.
2. Remove the two liftgate glass hinge nut access covers (one on each side.)
3. Disconnect the rear window electrical harness connector.
4. Disconnect the heated window grid wire electrical connector.
NOTE: An assistant may be needed to carry out this step.
5. Disconnect the two liftgate window glass cylinders.
1. Slide the spring retainer to the end of the socket.
2. Disconnect the socket from the ball stud and remove the liftgate window glass.
NOTE: Apply threadlock to bolts before installation.
6. To install, reverse the removal procedure.
