Tribute 2WD L4-2.3L (2005)
b. Reposition the subframe to center the locating pins so there is no longer contact with any edge of the locating hole.
NOTE:
THE PINS ARE MORE LIKELY TO CONTACT THE REARWARD SIDE OF THE HOLES. THEREFORE, THE SUBFRAME
ASSEMBLY WILL MOST LIKELY NEED TO BE MOVED FORWARD IN VEHICLE.
c. Tighten the rear subframe bolts. Refer to M53 online instructions or Workshop Manual (section 09-10 SUBFRAME - REAR,
REMOVAL/INSTALLATION).
d. Adjust rear toe. Refer to M53 online or Workshop Manual (section 02-11 REAR TOE ADJUSTMENT).
WARRANTY INFORMATION
NOTE:
^
This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
^
This repair will be covered under Mazda's New Vehicle Limited Warranty term. Additional diagnostic time cannot be claimed for this repair.
Disclaimer