mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Recall - Interior Impact Non-Compliance|Page 4749 > < Recall - Interior Impact Non-Compliance|Page 4747
Page 4
background image

1. Verify the vehicle is within the ranges:

If the vehicle is within the above range, go to step 2.

If vehicle is not within the above range, return it to inventory or the customer.

2. Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect vehicle for an Authorized Modification Label RECALL 4006D attached
to the vehicle's bulkhead.

eMDCS System - Vehicle Status Inquiry Results

REPAIR PROCEDURES

A. VEHICLE INSPECTION PROCEDURE

1. Verify that the vehicle is within the following ranges:

- 2005 Tribute within the following VIN ranges: (built between Job #1 through March 31, 2005) 4F2YZ****5KM00003 - 4F2YZ****5KM62453

- If the vehicle is within the above ranges, proceed to Step 2.

- If the vehicle is not within the above range, return the vehicle to the customer or inventory.

2. Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect  vehicle for a Campaign Label Recall 4006D attached to the vehicle's 
hood. Refer to eMDCS System - Warranty Vehicle Inquiry Results table.

Recall - Interior Impact Non-Compliance|Page 4749 > < Recall - Interior Impact Non-Compliance|Page 4747