Tribute 2WD L4-2.3L (2005)
NOTE: If equipped with a side air bag module note the routing of the wiring harness for installation.
5. Remove the front seat backrest.
1. Remove the pivot nut.
2. Remove the backrest. If equipped with heated seats, disconnect the backrest heated grid electrical connector.
Installation
NOTE: If a side air bag deployment took place, a new seatback pad, trim cover, and side air bag module must be installed. A new seatback frame
should be installed if necessary.
1. Install the front seat backrest.
1. Install the backrest.
2. Install the pivot nut.
2. Install the front seat backrest bolts. If equipped with heated seats, connect the backrest heated grid electrical connector.