Tribute 2WD L4-2.3L (2005)
3. Install the inboard seat cushion side shield.
4. Install the outboard seat cushion side shield.
1. Install the shield, if equipped with power/heated seat, connect the electrical connector(s).
2. Install the screw.
3. Install the seat backrest handle
5. If equipped, install the seat height adjustment control.
6. Install the driver seat.
Front Seat Backrest - Passenger Seat Removal and Installation
FRONT SEAT BACKREST - PASSENGER SEAT REMOVAL AND INSTALLATION
Removal
NOTE: If a side air bag deployment took place, a new seatback pad, trim cover, and side air bag module must be installed. A new seatback frame
should be installed if necessary.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may
result in damaged components.
1. Remove the passenger seat.
