Tribute 2WD L4-2.3L (2005)
2. Remove the front seat cushion pan.
-
Remove the bolts.
-
Remove the front seat cushion pan.
3. If equipped with manual seats, remove the seat adjuster and unclip the seat adjuster pins.
WARNING: Do not handle the safety belt buckle and pre-tensioner in the area of the safety belt buckle and pretensioner cable or
retaining nut. Accidental pretensioner deployment could occur and result in personal injury.
NOTE: Note the routing of the wiring harness for installation.
4. Remove the safety belt buckle and pretensioner from the seat track.
-
Using the special tool, remove the bolt.
-
Remove the safety belt buckle and pretensioner.
Installation
NOTE: If a side air bag deployment took place, a new seatback pad, trim cover, and side air bag module must be installed. A new seatback frame
should be installed if necessary.