Tribute 2WD L4-2.3L (2005)
7. Remove the dust boot.
Caution: Use a plastic or wooden pick to remove the piston seal from the caliper bore. A metal tool may scratch or nick the seal groove, which
could result in a seal leak.
8. Remove the piston seal using a plastic or wooden tool.
9. To assemble, reverse the disassembly procedure.
^
Lubricate the piston, seal with clean brake fluid.
Brake Caliper Anchor Plate
BRAKE CALIPER ANCHOR PLATE
Removal and Installation
1. Remove the front brake pads.
2. Remove the bolts and brake caliper anchor plate.
3. To install, reverse the removal procedure.
