Tribute 2WD L4-2.3L (2005)
Wheel Cylinder: Service and Repair
Disassembly and Assembly
WHEEL CYLINDER
Disassembly and Assembly
1. Remove the rear drum brake wheel cylinder.
2. Remove the bleed screw cap and the bleed screw.
3. Remove the dust boots.
4. Remove the pistons.
5. Remove the piston seals from the pistons.
6. Remove the spring.
Note: Inspect the wheel cylinder bore for excessive wear, corrosion or pitting. If any of these conditions exist, a new wheel cylinder must be
installed.
7. To assemble, reverse the disassembly procedure.
^
Lubricate the piston seals and wheel cylinder bore with clean brake fluid.
8. Bleed the brake system.
