Tribute 2WD L4-2.3L (2005)
Brake Switch (Cruise Control): Service and Repair
SPEED CONTROL DEACTIVATOR SWITCH
Removal
1. Remove the deactivator switch.
1. Disconnect the electrical connector.
2. Rotate counterclockwise 45 degrees and remove the deactivator switch.
Installation
CAUTION: Initial installation of a deactivator switch allows for one adjustment. If additional adjustments are required, install a new switch.
1. Release the plunger lock.
-
Turn the lock knob counterclockwise until the first click is felt.
2. Depress the brake pedal.