Tribute 2WD L4-2.3L (2005)
Caution:
^
The special tool 303-465 is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine damage.
Note:
^
The camshaft timing slots are offset. If the special tool cannot be installed, rotate the crankshaft one complete revolution clockwise to correctly
position the camshafts.
7. Install the special tool in the slots on the rear of both camshafts.
8. Remove the engine plug bolt.
Note:
^
Only turn the engine in the normal direction of rotation.
Note:
^
Installing the special tool in this step will prevent the engine from being rotated in the clockwise direction.
9. Install the special tool.
