Tribute 2WD L4-2.3L (2005)
Crankshaft Main Bearing Seal: Service and Repair
FLEX PLATE OR FLYWHEEL AND CRANKSHAFT REAR SEAL
Removal
2. With the vehicle in NEUTRAL, position it on a hoist.
3. If equipped, remove the automatic transaxle.
4. If equipped, remove the manual transaxle and clutch.
5. Remove the flexplate or flywheel bolts and the flexplate or flywheel.
6. Remove the engine front cover bolts.
7. Remove the oil pan bolts and the oil pan.
8. Remove the crankshaft rear oil seal with retainer plate bolts and remove the crankshaft rear oil seal with retainer plate.
Installation
