Tribute 2WD L4-2.3L (2005)
Hose/Line HVAC: Service and Repair
Compressor to Condenser Line
Removal and Installation
1. Remove the front bumper cover.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
2. Remove the nut and disconnect the A/C discharge line (peanut) fitting.
3. Raise and support the vehicle. See LIFTING.
4. Remove the RH splash shield.
5. If equipped, disconnect the engine block heater electrical connector.
6. Disconnect the A/C clutch field coil electrical connector.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.