Tribute 2WD L4-2.3L (2005)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Outlet Pipe
AIR CLEANER OUTLET PIPE
Removal and Installation
1. Disconnect the air cleaner outlet pipe at the mass air flow/intake air temperature sensor.
-
Loosen the screw clamp and disconnect the pipe.
2. Remove the outlet pipe.
-
Disconnect the outlet pipe from the throttle body.
-
Unclip the hose from the outlet pipe.
-
Disconnect the crankcase vent tube and remove the air cleaner outlet pipe.
NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.
3. To install, reverse the removal procedure.
