Tribute 2WD L4-2.3L (2005)
Wheel Bearing: Service and Repair
Front Suspension
Wheel Bearing, Hub, Knuckle and Lower Arm - Front
WHEEL BEARING, HUB, KNUCKLE AND LOWER ARM - FRONT
Removal
1. Remove the wheel and tire.
2. Lower the vehicle on the hoist.
3. Position a floor jack under the ball joint and raise the control arm until the vehicle starts to rise off the hoist.
4. Record the ride height.
5. Remove the floor jack.
6. Raise the vehicle on the hoist.
7. Separate the lower ball joint from the wheel knuckle.
1. Remove the pinch bolt and nut.
2. Separate the lower ball joint from the wheel knuckle.
