Tribute 2WD L4-2.3L (2005)
^
Evaporative emissions (EVAP) system
^
Fuel tank level shut-off valve (part of the fuel tank)
^
Fuel tank
13.
Remove, but do not discard spider screen (vent cap) from end of vent line.
14.
Measuring from open end of vent line, cut off and discard the last 13" (35 cm).
15.
Reinstall spider screen (vent cap) into vent line.
16.
Route shortened vent line and spider screen (vent cap) into open subframe/body section alignment hole.
17.
Push spider screen (vent cap) at least 2" (50 mm) into hole.
18.
Secure vent line to fuel tank strap with a plastic tie strap.
19.
Reposition filler pipe into its original position.
