Tribute 2WD L4-2.3L (2005)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
IDLE AIR CONTROL (IAC) VALVE
Removal and Installation
1. Remove the air cleaner outlet tube. See AIR CLEANER OUTLET PIPE.
2. Remove the upper snow shield.
-
Remove the upper snow shield-to-intake manifold screw.
-
Remove the upper snow shield-to-intake manifold pin-type retainer.
3. Remove the lower snow shield.
-
Remove the lower snow shield-to-intake manifold screws (2 req'd)
4. Disconnect the idle air control (IAC) valve electrical connector.
5. Remove the two bolts and the IAC valve.
-
Discard the gasket.
6. To install, reverse the removal procedure.
-
Install a new gasket.