Tribute 2WD L4-2.3L (2005)
3.
Monitor all "_OD" PID(s) matching the DTC present; follow diagnostic procedure for the PID that reads "FAULT".
^
For example, a B2296 fault is present. In DataLogger the fault PID 2296_18_OD PID reads "FAULT" indicating a front internal crash
sensor fault.
4.
To view the fault PIDs associated with a continuous memory DTC:
a. Toolbox
b. DataLogger
c. Modules
d. RCM
5.
Monitor all "_CM" PID(s) matching the DTC present; follow diagnostic procedure for the PID that reads "FAULT".
^
For example, a B2296 fault is present. In DataLogger the fault PID 2296_18_CM PID reads "FAULT" indicating a front internal crash
sensor fault.
IDS/PDS Fault PID Naming Conventions
The fault PIDs as displayed on IDS/PDS uses a strategy associating it with the DTC. For example, the fault PIDs 2296_18_OD and 2296_18_CM
breakdown as follows:
^
2296 - The DTC number minus the "B" (body) or "C" (chassis) designation.
^
18 - An identifier used to distinguish between each of the fault PIDs associated with the DTC.
^
OD - Identifies the fault PID as an on-demand fault.
^
CM - Identifies the fault PID as a continuous memory (intermittent) fault.
NOTE:
THE DTCS AND FAULT PIDS SUPPORTED BY A VEHICLE WILL VARY DEPENDING ON VEHICLE EQUIPMENT.
Disclaimer