Tribute 2WD L4-2.3L (2005)
Clockspring Assembly / Spiral Cable: Description and Operation
AIR BAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM
The air bag supplemental restraint system (SRS) is designed to provide increased collision protection for front seat and second row outboard occupants
in addition to that provided by the three-point safety belt system. Safety belt use is necessary to obtain the best occupant protection and to receive the full
advantage of the SRS. This vehicle line contains dual stage deployment (advanced restraint system) driver and front passenger air bag modules. These
vehicles can also be equipped with optional safety canopies that deploy from the A-pillar to the C-pillar upon a side impact or if a rollover condition is
detected. A unique restraints control module (RCM) is used on these vehicles which will detect a potential rollover condition. In addition, a front impact
severity sensor is mounted to the radiator support bracket, a seat position sensor is mounted to the driver seat and a usage detection switch is added to the
front driver and passenger outboard buckles.
Air Bag Sliding Contact
The air bag sliding contact:
-
is mounted on the steering column, behind the steering wheel.
-
continuously transfers electrical signals from restraints control module (RCM) to the driver air bag module.
