Tribute 2WD L4-2.3L (2005)
15. Disconnect the passenger-side safety canopy module electrical connector
1. Slide and disengage the passenger-side safety canopy module electrical connector locking clip.
2. Push in to release the tab and disconnect the passenger-side safety canopy module electrical connector.
16. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger-side safety canopy module electrical connector.
17. Remove the driver-side D-pillar trim panel.
1. Separate the weatherstrip.
2. Pull out and separate the quarter trim panel at the D-pillar trim panel.
3. Pull out to release the retainers and remove the D-pillar trim panel.
18. Disconnect the driver-side safety canopy module electrical connector.
1. Slide and disengage the driver-side safety canopy module electrical connector locking clip.
2. Push in to release the tab and disconnect the driver-side safety canopy module electrical connector.