Tribute 2WD L4-2.3L (2005)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION (CKP) SENSOR
Removal
1. Disconnect the negative battery cable. See BATTERY DISCONNECT.
2. With the vehicle in NEUTRAL, position on a hoist. See LIFTING.
3. Disconnect the CKP electrical connector.
4. Remove the plug.
5. Turn the crankshaft pulley bolt to position the number one cylinder at top dead center and install the special tool.
6. Remove the CKP sensor bolts and the CKP sensor.
Installation
CAUTION: Only hand tighten the bolt or damage to the front cover may occur.