Tribute 2WD L4-2.3L (2005)
3. Move the top of the tire inboard or outboard to adjust camber (Figure 4).
- If more negative camber is desired, push the top of the tire inboard.
- If less negative camber is desired, pull the top of the tire outboard.
4. With the tire at the desired position, torque the new fasteners to 85 lb-ft (115 Nm).
5. Lower the vehicle back down.
6. Place vehicle on alignment rack and measure the alignment to confirm the desired camber change was achieved.
NOTE: Do not adjust the alignment settings (individual camber) beyond the released specifications.
PART(S) INFORMATION