Tribute 2WD L4-2.3L (2005)
6. Separate the lower ball joint from the wheel knuckle.
1. Remove the pinch bolt and nut.
2. Separate the lower ball joint from the wheel knuckle.
7. Using the special tool, separate the halfshaft from the wheel knuckle.
1. Position the halfshaft aside and support.
8. Remove the wheel knuckle.
1. Remove the strut-to-wheel knuckle bolts and nuts.
2. Remove the wheel knuckle.
9. Using the special tool, press the wheel hub from the wheel bearing and knuckle.
Note: This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle, after removing the wheel hub.
