Tribute 2WD L4-2.3L (2005)
Wheel Seal: Service and Repair
REAR DRIVE AXLE DIFFERENTIAL COVER, AXLE SHAFT, OIL SEAL AND WHEEL BEARING
Removal
1. Raise and support the vehicle.
2. Remove the bolts and the differential cover.
3. Clean the sealer from the mating surfaces.
Installation
Note: The differential housing must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If possible, allow
one hour before filling with lubricant to make sure the silicone is sealant has correctly cured.