Tribute 2WD L4-2.3L (2005)
can result in personal injury.
6. Clean all parts thoroughly in clean solvent and blow dry with moisture-free regulated compressed air.
7. Inspect the pump body and gears for damage and wear.
^
Driven gear teeth.
^
Drive gear teeth.
^
Gear bore.
^
Crescent.
^
Lubrication passages and holes.
8. Inspect the pump support apply circuit passages and lubrication passages.
1. Rear lube (from cooler TC circuit).
2. Reverse clutch (RC).
3. Direct clutch (DC).
4. Forward clutch (FC).
5. Coast clutch (CC).
6. Converter clutch bypass (CBY).
Assembly
Note: The identification dot on the pump driven gear must face downward.
1. Install the pump driven gear.
