Tribute 2WD L4-2.3L (2005)
7. Cut the urethane adhesive applicator tip to specification.
NOTE: Use caution when applying urethane adhesive. Apply to the outside edges of locating tabs on the glass surface.
8. Apply a bead of urethane adhesive. Start at the bottom and work around to the sides of the quarter window glass.
9. Install the quarter window glass, aligning it to the marks previously made.
10. After the urethane adhesive has cured, check for water leaks and add urethane adhesive where needed.
11. If necessary, remove excess urethane adhesive from the outside surface of the quarter window glass.
