Tribute 2WD L4-2.5L (2009)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor And Sensor Ring Removal/installation
REAR WHEEL SPEED SENSOR AND SENSOR RING REMOVAL/INSTALLATION
Wheel Speed Sensor - Rear
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the grommet from the body.
-
When removing the body grommet, rotate the grommet into a position which allows the use of a small screwdriver to release the tabs on the
underside of the body grommet. These 2 tabs are located at right angles to the sensor wire.
CAUTION:Care must be taken during the removal of the grommet to prevent damage. If the grommet is damaged, a new sensor may need to be
installed, even though the sensor is functional in all other aspects.