Tribute 2WD L4-2.5L (2009)
Crankshaft Main Bearing: Testing and Inspection
CRANKSHAFT END PLAY
1. Using the Dial Indicator Gauge, measure the crankshaft end play.
2. Position the crankshaft to the rear of the cylinder block.
3. Zero the indicator.
4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
-
If crankshaft end play exceeds specifications, install a new crankshaft thrust washer or crankshaft thrust main bearing.
NOTE:See See: Specifications for the specification.
