Tribute 2WD L4-2.5L (2009)
2. Apply a 2.5 mm (0.098 inch) bead of silicone gasket and sealant to the oil pan-to-engine block and to the oil pan-to-engine front cover mating
surface.
NOTE:If the oil pan is not secured within 10 minutes of sealant application, the sealant must be removed and the sealant area cleaned with metal surface
cleaner. Allow to dry until there is no sign of wetness, or 10 minutes, whichever is longer. Failure to follow this procedure can cause future oil leakage.
3. Position the oil pan onto the engine and install the oil pan bolts finger-tight.
4. Install the 4 engine front cover-to-oil pan bolts.
-
Tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
NOTE:The engine front cover-to-oil pan bolts must be tightened first to align the front surface of the oil pan flush with the front surface of the engine
block.
