Tribute 2WD L4-2.5L (2009)
2. Remove the floor console. See See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair.
3. Remove the front door scuff plate trim panels and the lower A-pillar trim panels. See See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair/A-Pillar Trim Panel Removal/Installation.
Vehicles with automatic transaxle
1. Detach the selector lever cable from the gearshift assembly.
a. Disconnect the selector lever cable end from the gearshift lever.
b. Remove the selector lever cable from the bracket.
All vehicles
1. Separate the wiring harness from the LH floor duct and position aside.
NOTE:Position the carpet to gain access to the floor ducts.
2. Remove the LH floor duct.
3. Remove the RH floor duct pin-type retainer.
4. Remove the RH floor duct.
5. To install, reverse the removal procedure.