Tribute 2WD L4-2.5L (2009)
Installation
1. Inspect the solenoid(s) for damage.
2. If a new solenoid is not being installed, install the solenoid(s) into the bore from which it was removed.
3. If Installing a new Variable Force Solenoid (VFS), determine the base part number of the solenoid(s). The Torque Converter Clutch (TCC)
solenoid, Shift Solenoid A (SSA) and Shift Solenoid C (SCC) are all normally low pressure solenoids. The Line Pressure Control (LPC) solenoid,
Shift Solenoid B (SSB) and Shift Solenoid D (SSD) are all normally high pressure solenoids. Shift Solenoid E (SSE) is not a VFS ; it is an
ON/OFF solenoid.
4. Install the Leadframe Guide Pins in the solenoid body to align the lead frame for installation.
