Tribute 2WD L4-2.5L (2009)
Parking Brake Warning Switch: Service and Repair
PARKING BRAKE WARNING INDICATOR SWITCH REMOVAL/INSTALLATION
1. Remove the parking brake release handle bolt.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
2. Disconnect the warning indicator switch electrical connector.
3. Remove the bolt and warning indicator switch.
-
To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
4. To install, reverse the removal procedure.