Tribute 2WD L4-2.5L (2009)
1. Install the solenoid body onto the main control valve body. Install the 2 bolts.
-
Tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
2. Position the OSS and TR sensor wiring harnesses aside and install the main control-to-axle case separator plate.
NOTE:If cleaning the main control assembly or inspecting the valves, see See: Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Overhaul/Main Control Valve Body Assembly Disassembly/Assembly.