Tribute 2WD L4-2.5L (2009)
15. Position the transaxle fluid cooler tube bracket and transaxle fluid cooler tube assembly in place and install the 2 nuts.
-
Tighten to 9 Nm {0.9 kgf-m, 80 in-lbf}.
16. Connect the transaxle electrical connector.
15. Position the transaxle fluid cooler tube bracket and transaxle fluid cooler tube assembly in place and install the 2 nuts.
-
Tighten to 9 Nm {0.9 kgf-m, 80 in-lbf}.
16. Connect the transaxle electrical connector.