Tribute 2WD L4-2.5L (2009)
Fluid Pan: Service and Repair
MAIN CONTROL COVER REMOVAL/INSTALLATION
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. See See: Maintenance/Vehicle Lifting/Service and Repair/Lifting.
2. Remove the air cleaner (ACL) assembly.
a. Remove the ACL assembly bracket bolt.
b. Disconnect the mass air flow sensor (MAF) sensor electrical connector.
c. Disconnect the brake booster vacuum hose from the ACL outlet pipe.
d. Detach the wiring fastener from the ACL assembly.
e. Disconnect the engine breather from the ACL assembly.
f.
Loosen the ACL outlet pipe clamp at the throttle body (TB) and remove the ACL and ACL outlet pipe assembly.