Tribute 2WD L4-2.5L (2009)
1. Clean and inspect the solenoid body, solenoids and valve assemblies for damage. Inspect the solenoid screens for debris that may restrict fluid
flow through the screen.
CAUTION:Be careful not to wash the numbers from the solenoids or the solenoid body. Failure to install the solenoids in the ports they were originally
in can result in damage to the transaxle or a harsh shift.
CAUTION:Do not stone or polish any valves. If the valves do not move freely during assembly, install a new solenoid body.
2. Position the solenoids in the solenoid body ports from which their numbers correspond.
CAUTION:The solenoids are calibrated from the factory and are not all the same. Failure to install the solenoids in the ports they were originally in can
result in damage to the transaxle or a harsh shift.
3. Install the solenoid retaining pins.
4. Install the Leadframe Guide Pins in the solenoid body to align the leadframe for installation.
