Tribute 2WD L4-2.5L (2009)
1. Install the TR sensor.
a. Install the TR sensor and the park pawl actuating rod in the transaxle case.
b. Install the manual shaft in the transaxle case through the TR sensor.
NOTE:The TR sensor is easier to install into the transaxle from under the vehicle.
2. Using a suitable tool such as a center punch or a 5.5 mm (0.216 in) socket and a 101.6 mm (4 in) extension 1/4 inch drive, install a new TR sensor
locking pin.
3. Install the TR sensor detent spring and bolt. Connect the TR sensor electrical connector.