Removal and Replacement of Pressure Regulating Solenoid
9. Install the circuit filter.
10. Install the separator plate and the 2 bolts.
-
Tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
11. If not previously done, see See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Overhaul/Main Control Valve Body
Assembly Disassembly/Assembly for disassembly and assembly of the valve body.
12. Position the solenoid body assembly on the valve body and install the 2 bolts.
