Tribute 2WD V6-3.0L (2008)
Antenna Cable: Service and Repair
Antenna Cable - AM/FM Removal/Installation
ANTENNA CABLE - AM/FM REMOVAL/INSTALLATION
NOTE: View shown from behind instrument panel for clarity.
1. Remove the audio unit.
2. Disconnect the AM/FM antenna cable from the AM/FM antenna.
3. Release the AM/FM antenna cable pin-type retainers.
NOTE: Lower the glove compartment completely to access the pin-type retainers.
4. Remove the AM/FM antenna cable.
5. To install, reverse the removal procedure.