Tribute 2WD V6-3.0L (2008)
from the seat cushion foam pad.
3. Invert and remove the cushion trim cover.
4. Remove the 2 bolts and the cushion pivot upper link.
-
To assemble, tighten to 40 N.m {4.0 kgf.m, 30 ft.lbf}.
5. Remove the 2 cushion hinge floor bracket bolts and cushion support-to-floor bracket.
-
To assemble, tighten to 40 N.m {4.0 kgf.m, 30 ft.lbf}.
6. To assemble, reverse the disassembly procedure.