Tribute 2WD V6-3.0L (2008)
^
To install, tighten to 25 N-m (2.5 kgf-m, 18 ft-lbf).
6. Remove the 3 nuts and the engine support insulator bracket.
^
To install, tighten to 55 N-m (5.6 kgf-m, 41 ft-lbf).
7. Remove the 3 bolts and the engine support insulator.
^
To install, tighten to 48 N-m (4.9 kgf-m, 41 ft-lbf).
8. To install, reverse the removal procedure.
