Tribute 2WD V6-3.0L (2008)
Hose/Line HVAC: Service and Repair
Condenser to Evaporator Line Removal/Installation
CONDENSER TO EVAPORATOR LINE REMOVAL/INSTALLATION
Part 1
Part 2
NOTE: Installation of a new receiver/drier is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the receiver/drier.
1. Recover the refrigerant. See DISCHARGING AND RECOVERY.
2. Remove the front bumper cover.
3. Remove the condenser-to-suction accumulator line bracket nut.
-
To install, tighten to 8 N.m (0.8 kgf.m, 71 in.lbf).