Tribute 2WD V6-3.0L (2008)
Fluid - M/T: Service and Repair
TRANSAXLE DRAINING AND FILLING
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the drain plug and drain the fluid.
3. Install the drain plug.
^
Tighten to 35 N-m (3-5 kgf-m, 26 ft-lbf}.
Note
^
Use a new gasket and apply sealant on the drain plug.
4. Remove the fill level inspection plug.
5. Remove the transaxle fill plug.