Tribute 2WD V6-3.0L (2008)
Wheel Bearing: Service and Repair
Rear Suspension
WHEEL BEARING REMOVAL/INSTALLATION
Removal
Note
^
LH shown, RH similar.
All wheel drive (AWD) vehicles
1. Remove the wheel knuckle.
Front wheel drive (FWD) vehicles
2. Remove and discard the wheel hub nut.
3. Remove the anti-lock brake system (ABS) wheel speed sensor ring.
All vehicles
4. Using the special tools, remove the wheel hub.
5. Using the special tool, press the inner wheel bearing race from the wheel hub.
Note
^
This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle after removing the wheel hub.
6. Remove the wheel bearing snap ring from the wheel knuckle.
FWD vehicles