Tribute 2WD V6-3.0L (2008)
Oxygen Sensor: Service and Repair
HEATED OXYGEN SENSOR (HO2S) AND CATALYST MONITOR SENSOR - 3.0L REMOVAL/INSTALLATION
1. With the vehicle in NEUTRAL, position it on a hoist. See LIFTING.
2. Remove the 7 bolts (5 shown) and the LH splash shield.
-
To install, tighten to 10 N.m {1.0 kgf.m, 89 in.lbf}.
3. Disconnect the heated oxygen sensor (HO2S) and the catalyst monitor sensor electrical connectors.
4. Using the special tool, remove the HO2S and the catalyst monitor sensor.
