Tribute 2WD V6-3.0L (2008)
11.
Remove the vent line from the dust separator attached to the canister assembly and clear out the line using compressed air.
12.
Inspect the dust separator for water/moisture or any obstruction.
-
If water/moisture or obstructions are present, proceed to the "Pinpoint Test: Slow to Fuel" below.
-
If no water/moisture or obstructions are present, reattach vent line to dust separator and continue to Step 13.
PINPOINT TEST: SLOW TO FILL
Normal Operation
Under normal operation, fuel should flow at a steady rate through the fuel tank filler pipe into the fuel tank. As fuel enters the fuel tank, air is
vented through the filler pipe or the on-board refueling vapor recovery (ORVR) system.
