Tribute 2WD V6-3.0L (2008)
Parking Brake Warning Switch: Service and Repair
PARKING BRAKE WARNING INDICATOR SWITCH REMOVAL/INSTALLATION
1. Remove the parking brake release handle bolt.
^
To install, tighten to 10 N-m (1.0 kfg-m, 89 in-lbf).
2. Disconnect the warning indicator switch electrical connector.
3. Remove the bolt and warning indicator switch.
^
To install, tighten to 10 N-m (1.0 kfg-m, 89 in-lbf).
4. To install, reverse the removal procedure.