Tribute 2WD V6-3.0L (2008)
Note
^
Align the notch on the cam nut with the index marks.
2. Using a suitable tool, hold the cam nut stationary while tightening the wheel knuckle bolt.
^
Tighten to 150 N-m (15.3 kgf-m, 111 ft-lbf).
3. Position the lower ball joint into the wheel knuckle and install the lower ball joint nut.
^
Tighten to 63 N-m (6.3 kgf-m, 46 ft-lbf).
4. Install the coil spring.
Vehicles with ABS
5. Position the ABS wheel speed sensor harness and the sensor.
6. Install the ABS wheel speed sensor bolt and the 2 ABS wheel speed sensor harness bolts.
^
Tighten to 9 N-m (0.9 kgf-m, 80 in-lbf).
All vehicles
7. Connect the brake tube to the wheel cylinder.
^
Tighten to 17 N-m (1.7 kgf-m, 13 ft-lbf).
8. Install the brake tube bracket bolt.
^
Tighten to 22 N-m (2.2 kgf-m, 16 ft-lbf).
9. Connect the parking brake cable to the brake backing plate and install the parking brake cable bracket bolt.
^
Tighten to 23 N-m (2.3 kgf-m, 17 ft-lbf).
10. Install the brake shoes.
11. Bleed the brake system.
12. Check and, if necessary, align the rear end.
